For Scientific Equipment Since 1970 |
| Established in 1946, Instron manufactures and services materials testing instruments, systems, and accessories, providing you with comprehensive solutions for all your research, quality, and service-life testing requirements. Our machines evaluate the mechanical properties of materials and components using tension, compression, flexure, fatigue, impact, torsion and hardness tests. We offer a broad range of service capabilities, including calibration, training, technical support, and assistance with laboratory management. |
| Products: |
Electromechanical Systems
Electromechanical or universal testing machines are most commonly used for static testing in a tensile or compression mode within a single frame. They are also
referred to as pull testers. Additional test types include tensile, compression, shear, flexure, peel, tear, cyclic, and bend tests. Capacities for these systems range
from low-load forces of 0.5 kN (112 lbf) up to high-capacity 600 kN (135,000 lbf) test frames.
Electromechanical or universal testing machines are most commonly used for static testing in a tensile or compression mode within a single frame. They are also
referred to as pull testers. Additional test types include tensile, compression, shear, flexure, peel, tear, cyclic, and bend tests. Capacities for these systems range
from low-load forces of 0.5 kN (112 lbf) up to high-capacity 600 kN (135,000 lbf) test frames.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Environmental
Chambers
Chambers
Pneumatic Side
Action Grip
Action Grip
Screw Side
Action Grips
Action Grips
Mechanical Wedge
Action Grips
Action Grips
Compression
Platen Anvils
Platen Anvils
Flexure Fixtures
Adhesive Peel
Fixtures
Fixtures
Choose the accessories that fit your application; Grips, Fixtures, Extensometry, and Environmental
Long Travel
Extensometer
Extensometer
Static Clip-On
Extensometer
Extensometer
Non-Contacting
Video Extensom.
Video Extensom.
Servo-hydraulic Testing Systems
Instron offers an extensive range of fully-integrated dynamic and fatigue testing systems from 1000 N up to 2500 kN. Incorporating servohydraulic, servo-electric
and linear motor technologies, these test instruments cover a broad range of fatigue, dynamic, and static testing applications. These applications include high-cycle
fatigue, low-cycle fatigue, thermo-mechanical fatigue, crack propagation and growth studies, fracture toughness, bi-axial, axial-torsional, multi-axial, high strain rate,
quasi-static, creep, stress-relaxation, and other types of dynamic and static tests.
Instron offers an extensive range of fully-integrated dynamic and fatigue testing systems from 1000 N up to 2500 kN. Incorporating servohydraulic, servo-electric
and linear motor technologies, these test instruments cover a broad range of fatigue, dynamic, and static testing applications. These applications include high-cycle
fatigue, low-cycle fatigue, thermo-mechanical fatigue, crack propagation and growth studies, fracture toughness, bi-axial, axial-torsional, multi-axial, high strain rate,
quasi-static, creep, stress-relaxation, and other types of dynamic and static tests.
| • Low-Capacity 8800 Servohydraulic Testing Systems These servohydraulic testing systems are ideal for performing a variety of fatigue and dynamic tests, as well as static tests. All systems are equipped with the advanced features of the 8800 digital controller, Console Software and the unique, fatigue-rated Instron Dynacell™ load cells. WaveMatrix™ Dynamic Testing Software provides the backbone for running many dynamic tests. |
• Load capacity is up to
100 kN (22500 lbf)
• Tabletop and floor models
• Axial-torsion tabletop model
100 kN (22500 lbf)
• Tabletop and floor models
• Axial-torsion tabletop model
Low-Capacity 8800
Servohydraulic Testing
Systems
Servohydraulic Testing
Systems
• Capacity is up to 10 kN (2250 lbf)
• Linear-Torsion Model
• All-Electric Dynamic
Instruments
• Linear-Torsion Model
• All-Electric Dynamic
Instruments
ElectroPuls™ systems use patented linear
motor technology to offer slow-speed static
testing and high-frequency dynamic fatigue
testing with hundreds of Hertz capability.
Running from only a single-phase electrical
connection to the wall, ElectroPuls systems
are dynamic testing machines that do not have
the environmental impact of conventional
servohydraulic technologies.
motor technology to offer slow-speed static
testing and high-frequency dynamic fatigue
testing with hundreds of Hertz capability.
Running from only a single-phase electrical
connection to the wall, ElectroPuls systems
are dynamic testing machines that do not have
the environmental impact of conventional
servohydraulic technologies.
ElectroPuls testing Instruments
Linear-Torsion Test Instruments
The E10000 Linear-Torsion Floor Test
Instrument includes load frame, patented
linear motor/torsion actuator, displacement
& force transducer set, advanced digital
controller and Console software.
Instrument includes load frame, patented
linear motor/torsion actuator, displacement
& force transducer set, advanced digital
controller and Console software.
| Additional Dynamic and Fatigue Instruments |
Higher Capacity 8800
servohydraulic Testing
Systems
servohydraulic Testing
Systems
• Load
Capacity is
up to 500 kN
(112,500 lbf)
• Floor
Models
Capacity is
up to 500 kN
(112,500 lbf)
• Floor
Models
High-Precision 8860
Servo-Electric test
systems
Servo-Electric test
systems
VHS 8800 High-Strain
Rate Systems
Rate Systems
8800 planar Biaxial
Cruciform Test
Systems
Cruciform Test
Systems
Axial-Torsion and
Multi-Axial Testing
Systems
Multi-Axial Testing
Systems
Rotating Beam
Fatigue Systems
Fatigue Systems
Static Hydraulic Testing Systems
Instron offers an extensive range of high-capacity universal testing machines. These
frames use hydraulics to cost-effectively provide the forces necessary for static tension,
compression, bend, and shear testing.
Instron offers an extensive range of high-capacity universal testing machines. These
frames use hydraulics to cost-effectively provide the forces necessary for static tension,
compression, bend, and shear testing.
LX Testing Systems
- Capacity:150-600KN
(33,750-135,000lbf)
- Single Phase Power.
- Bottom Mounted Dual
acting actuator.
(33,750-135,000lbf)
- Single Phase Power.
- Bottom Mounted Dual
acting actuator.
LX Models are ideal for high-capacity Tension,
Compression , Flex and shear testing. These
Frames feature a single large test space for
safe and easy access.
Compression , Flex and shear testing. These
Frames feature a single large test space for
safe and easy access.
DX Testing Systems
- Capacity:150-600KN
(33.750-135.000lbf)
- Single Phase Power.
- Bottom Mounted
single acting Piston.
(33.750-135.000lbf)
- Single Phase Power.
- Bottom Mounted
single acting Piston.
DX Models are ideal for high-capacity
Tension, Compression , Flex and shear
testing. These Frames feature two test
spaces so users can quickly change between
tension and compression testing without to
remove heavy fixtures.
Tension, Compression , Flex and shear
testing. These Frames feature two test
spaces so users can quickly change between
tension and compression testing without to
remove heavy fixtures.
KN Testing Systems
- Capacity: 300-3500KN
(67,500-800,000lbf)
- single ultra test space.
- Long test stroke and
fast test speed.
(67,500-800,000lbf)
- single ultra test space.
- Long test stroke and
fast test speed.
KN Models designed for high-capacity
Tension, Compression, Bend/Flex and Shear
testing. These frames provide ultimate ease
of use and versatility by accommodating a
variety of specimen sizes, Grips, Fixtures and
extensometry.
Tension, Compression, Bend/Flex and Shear
testing. These frames provide ultimate ease
of use and versatility by accommodating a
variety of specimen sizes, Grips, Fixtures and
extensometry.
HVL Models are ideal for high-capacity
tension, compression, flex, and shear testing.
The frames feature two test spaces so users
can quickly change between tension and
compression testing without having to remove
heavy fixtures. Models include: 400HVL,
400WHVL, 600HVL, and 600WHVL.
tension, compression, flex, and shear testing.
The frames feature two test spaces so users
can quickly change between tension and
compression testing without having to remove
heavy fixtures. Models include: 400HVL,
400WHVL, 600HVL, and 600WHVL.
Satec Series HVL
Models
Models
Satec Series RD Systems
a family of three compression testing models
ranging in capacity from 2,000 - 5,000 kN .The
system includes a floor standing welded frame,
precision pressure transducer measurement
device, and standard safety guards. This
machine is ideally suited for compression
applications where frame stiffness is critical.
ranging in capacity from 2,000 - 5,000 kN .The
system includes a floor standing welded frame,
precision pressure transducer measurement
device, and standard safety guards. This
machine is ideally suited for compression
applications where frame stiffness is critical.
Horizontal Materials Testing Machines
Available in capacities up to 10 MN (2.25
million lbf), these material testing machines
feature a horizontal test space to
accommodate extra long test specimens.
million lbf), these material testing machines
feature a horizontal test space to
accommodate extra long test specimens.
| NEW |
| ASK ABOUT: WAVE MATRIX & PARTNER SOFTWARES |
CEAST PRODUCTS |
Specimen Preparation
CEAST is proposing a complete series of instruments designed for sample preparation.
Manual Hollow Die Punch
Automatic Hollow Die Punch
Manual
Notchvis
Notchvis
Motorized
Notchvis
Notchvis
Automatic Notchvis
Plus
Plus
Contour
Cut
Cut
Mini-Cutvis Atomatic
Milling Machine
Milling Machine
Razor Notch
Mechanical and physical testing equipment
CEAST is proposing a wide range of instruments designed to determine the mechanical and physical properties of polymers, composites and finished products for both
research and development (R&D) and quality control (QC). The pendulum family was designed in order to perform Charpy, Izod and Tensile impact testing on material
specimens according to interantional standards.
CEAST is proposing a wide range of instruments designed to determine the mechanical and physical properties of polymers, composites and finished products for both
research and development (R&D) and quality control (QC). The pendulum family was designed in order to perform Charpy, Izod and Tensile impact testing on material
specimens according to interantional standards.
Process and Thermal Testing equipment
CEAST product range for rheological investigation on polymers include several instrument and in particular a Modular Line of Melt Indexer, specifically designed for the easy
and accurate measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR), fundamental properties of any thermoplastic material.
CEAST product range for rheological investigation on polymers include several instrument and in particular a Modular Line of Melt Indexer, specifically designed for the easy
and accurate measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR), fundamental properties of any thermoplastic material.
Melt Flow Indexer
Advanced Melt Flow Indexer
HDT/VICAT
Density Column
 | |  | |  | |  | |  |
Smart Rheometer
